LouisD/electric-gate-restoration-1
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
electric-gate-restoration-1/hardware/PCB/yard_gate_pcb_v1.0.md
Louis c8da939324 Adding one component
2023-05-11 21:26:18 +02:00

4.2 KiB
Raw Blame History

LiHoCo Yard Gate PCB v1.0

In order to make the system reliable and easy to install, I started to design a PCB.

The following circuit board has been realized with the help of EasyEDA software:

Image of front and rear pcb model in EasyEDA

Image of the electronic circuit diagram

Materials required:

Components

All the components can be ordered from LCSC or from Aliexpress but I had some components in my stuff so I didn't order them all on this site. I put a link for each component so you can order them anyway.

PCB printing

I used JLCPCB's printing services to make my printed card because the EasyEDA software came with it.

Results

Image of front and rear of the printed PCB

Points of improvement

Of course, we can find different points of improvement concerning the printed circuit, nevertheless, as it is, it is functional. It is therefore a good basis for making adjustments

We can quote for example:

  • The lack of a mounting hole to screw the plate
  • The gap between the terminals to be screwed could be eliminated and thus reinforce the solidity of the soldered component when screwing a cable tightly
  • The DIP switch allowing the choice of the code (of the button of the remote control) to activate the gate could be removed and connected each of the signals to GPIOs of the ESP32 and thus be able to execute different actions depending on the button.